AS/NZS 2576:2005
Welding consumables for build-up and wear resistance
Specifies requirements for welding consumables for build-up and wear resistance.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$147.60 NZD
|
|
| HardCopy |
$164.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2576:2005 WELDING CONSUMABLES FOR BUILD-UP AND WEAR RESISTANCE
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Impact
1.3.2 Loading condition
1.3.3 Lot or batch number
1.3.4 Self-shielded arc
1.3.5 Shall
1.3.6 Should
1.3.7 Temperature
1.4 CLASSIFICATION AND DESIGNATION
1.4.1 Basis of classification
1.4.2 Designation
SECTION 2 PROPERTIES AND REQUIREMENTS
2.1 MANUFACTURE
2.2 QUALIFICATION TESTS
2.3 CONFORMANCE TESTS
2.4 TESTS AND TEST PIECES REQUIRED
2.4.1 Tests
2.4.2 Number of test pieces required
2.5 RETESTS
2.6 CHEMICAL COMPOSITION REQUIREMENTS
2.7 MICROSTRUCTURE REQUIREMENTS
2.8 HARDNESS REQUIREMENTS
2.9 PACKAGING
2.10 MARKING
2.10.1 Information to be displayed
2.10.2 General safety warning
2.11 STORAGE
APPENDIX A - ATLAS OF TYPICAL PHOTOMICROGRAPHS
A1 SCOPE
A2 STEEL (1XXX)
A2.1 General
A2.2 Pearlitic steels (11XX)
A2.3 Austenitic manganese steels (12XX)
A2.4 Austenitic stainless steels (13XX)
A2.5 Low carbon martensitic steels (14XX)
A2.6 Tool steels (15XX)
A2.7 Martensitic stainless steels (16XX)
A2.8 High carbon austenitic steels (17XX)
A2.9 High carbon martensitic steel (18XX)
A2.10 High carbon martensitic steel with primary alloy carbides (19XX)
A3 CHROMIUM WHITE IRONS (2XXX)
A3.1 General
A3.2 Austenitic irons (21XX)
A3.3 Martensitic irons (22XX)
A3.4 Austenitic chromium carbide irons (23XX)
A3.5 Complex chromium carbide irons (24XX)
A3.6 Martensitic chromium carbide irons (25XX)
A4 TUNGSTEN CARBIDES (3XXX)
A4.1 General
A4.2 Carbide chips (+4000 mm) (31XX)
A4.3 Mixed carbide (in an iron-rich matrix), arc or gas welding (32XX-35XX)
A4.4 Mixed carbide (in a 52XX matrix), metal spray powders (36XX)
A5 COBALT ALLOYS (4XXX)
A5.1 General
A5.2 Complex cobalt base solid solution (41XX)
A5.3 Hypoeutectic Co-Cr-W alloys (42XX)
A5.4 Hypereutectic Co-Cr-W alloys (43XX)
A5.5 Co-Cr-Ni-W alloys (44XX)
A6 NICKEL ALLOYS (5XXX)
A6.1 General
A6.2 Complex nickel-base solid solution (51XX)
A6.3 Low melting point Ni-B alloys (52XX)
A6.4 Tungsten carbide (53XX)
A6.5 Solid solution alloys (54XX)
A7 COPPER ALLOYS
A7.1 General
A7.2 Phosphor bronze (Cu-Sn-P) (61XX)
A7.3 Phosphor bronze (Cu-Sn-P) (62XX)
A7.4 High tensile brass (manganese bronze) (Cu-Zn-Mn) (63XX)
A7.5 Nickel bronze (Cu-Zn-Ni) (64XX)
A7.6 Aluminium bronze (Cu-Al) (65XX)
A7.7 Nickel iron aluminium bronze (Cu-Fe-Ni-Al) (66XX)
A7.8 Manganese nickel iron aluminium bronze (Cu-Mn-Ni-Al) (67XX)
APPENDIX B - METHODS OF TEST
B1 TEST CONDITIONS
B2 MATERIAL FOR TEST PIECES
B3 TEST PIECES
B3.1 Preparation
B3.2 Welding
B4 TEST FOR CHEMICAL COMPOSITION
B5 EXAMINATION OF MICROSTRUCTURE
B6 HARDNESS TEST
Amendments
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Covered electrodes for welding - Corrosion-resisting chromium and chromium-nickel steel electrodes
Related Information
Similar Standards
-
AS/NZS 16834:2013
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012, MOD) -
AS/NZS 21952:2012
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification -
AS/NZS 2576:2005 A1
Welding consumables for build-up and wear resistance: Amendment 1
-
AS/NZS 4854:2024
Welding consumables – Covered electrodes for manual metal arc welding of stainless and heat-resisting steels – Classification
AS/NZS 2576:2005 WELDING CONSUMABLES FOR BUILD-UP AND WEAR RESISTANCE
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 Impact
1.3.2 Loading condition
1.3.3 Lot or batch number
1.3.4 Self-shielded arc
1.3.5 Shall
1.3.6 Should
1.3.7 Temperature
1.4 CLASSIFICATION AND DESIGNATION
1.4.1 Basis of classification
1.4.2 Designation
SECTION 2 PROPERTIES AND REQUIREMENTS
2.1 MANUFACTURE
2.2 QUALIFICATION TESTS
2.3 CONFORMANCE TESTS
2.4 TESTS AND TEST PIECES REQUIRED
2.4.1 Tests
2.4.2 Number of test pieces required
2.5 RETESTS
2.6 CHEMICAL COMPOSITION REQUIREMENTS
2.7 MICROSTRUCTURE REQUIREMENTS
2.8 HARDNESS REQUIREMENTS
2.9 PACKAGING
2.10 MARKING
2.10.1 Information to be displayed
2.10.2 General safety warning
2.11 STORAGE
APPENDIX A - ATLAS OF TYPICAL PHOTOMICROGRAPHS
A1 SCOPE
A2 STEEL (1XXX)
A2.1 General
A2.2 Pearlitic steels (11XX)
A2.3 Austenitic manganese steels (12XX)
A2.4 Austenitic stainless steels (13XX)
A2.5 Low carbon martensitic steels (14XX)
A2.6 Tool steels (15XX)
A2.7 Martensitic stainless steels (16XX)
A2.8 High carbon austenitic steels (17XX)
A2.9 High carbon martensitic steel (18XX)
A2.10 High carbon martensitic steel with primary alloy carbides (19XX)
A3 CHROMIUM WHITE IRONS (2XXX)
A3.1 General
A3.2 Austenitic irons (21XX)
A3.3 Martensitic irons (22XX)
A3.4 Austenitic chromium carbide irons (23XX)
A3.5 Complex chromium carbide irons (24XX)
A3.6 Martensitic chromium carbide irons (25XX)
A4 TUNGSTEN CARBIDES (3XXX)
A4.1 General
A4.2 Carbide chips (+4000 mm) (31XX)
A4.3 Mixed carbide (in an iron-rich matrix), arc or gas welding (32XX-35XX)
A4.4 Mixed carbide (in a 52XX matrix), metal spray powders (36XX)
A5 COBALT ALLOYS (4XXX)
A5.1 General
A5.2 Complex cobalt base solid solution (41XX)
A5.3 Hypoeutectic Co-Cr-W alloys (42XX)
A5.4 Hypereutectic Co-Cr-W alloys (43XX)
A5.5 Co-Cr-Ni-W alloys (44XX)
A6 NICKEL ALLOYS (5XXX)
A6.1 General
A6.2 Complex nickel-base solid solution (51XX)
A6.3 Low melting point Ni-B alloys (52XX)
A6.4 Tungsten carbide (53XX)
A6.5 Solid solution alloys (54XX)
A7 COPPER ALLOYS
A7.1 General
A7.2 Phosphor bronze (Cu-Sn-P) (61XX)
A7.3 Phosphor bronze (Cu-Sn-P) (62XX)
A7.4 High tensile brass (manganese bronze) (Cu-Zn-Mn) (63XX)
A7.5 Nickel bronze (Cu-Zn-Ni) (64XX)
A7.6 Aluminium bronze (Cu-Al) (65XX)
A7.7 Nickel iron aluminium bronze (Cu-Fe-Ni-Al) (66XX)
A7.8 Manganese nickel iron aluminium bronze (Cu-Mn-Ni-Al) (67XX)
APPENDIX B - METHODS OF TEST
B1 TEST CONDITIONS
B2 MATERIAL FOR TEST PIECES
B3 TEST PIECES
B3.1 Preparation
B3.2 Welding
B4 TEST FOR CHEMICAL COMPOSITION
B5 EXAMINATION OF MICROSTRUCTURE
B6 HARDNESS TEST
Amendments
Previous versions
AS/NZS 2576:2005
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.