AS/NZS 2201.1:2007
Intruder alarm systems - Client's premises - Design, installation, commissioning and maintenance
Sets out requirements for the construction, operation, performance and installation of intruder alarm equipment and systems installed in client`s premises, up to and including alarm equipment and outgoing signalling facilities. Operating and maintenance procedures including administration of records are also included.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$123.30 NZD
|
|
| HardCopy |
$137.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2201.1:2007 INTRUDER ALARM SYSTEMS - CLIENT™S PREMISES-DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 RISK ASSESSMENT
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Alarmed area
1.5.2 Alarm condition
1.5.3 Alarm transmission equipment
1.5.4 Alarm warning device
1.5.5 Arming
1.5.6 Arming station
1.5.7 Client
1.5.8 Control equipment
1.5.9 Deliberately operated device
1.5.10 Detection circuits
1.5.11 Detection device
1.5.12 Disarming
1.5.13 Fault condition
1.5.14 Indicating equipment
1.5.15 Intruder alarm system
1.5.16 Monitored circuit
1.5.17 Monitoring centre
1.5.18 Partial arming/disarming
1.5.19 Power supply equipment
1.5.20 Remote access
1.5.21 Restricted key
1.5.22 Satellite siren
1.5.23 Security alarm company
1.5.24 Shell
1.5.25 System alarm
1.5.26 Tamper-detection device
1.5.27 Zone
SECTION 2 SYSTEM INSTALLATION REQUIREMENTS
2.1 GENERAL REQUIREMENTS
2.2 INSTALLATION
2.2.1 General
2.2.2 Control equipment and power supply location
2.2.3 Mounting
2.2.4 Tamper detection
2.2.5 Power supply equipment
2.2.6 Battery marking
2.2.7 Alarm transmission equipment
2.3 DETECTION DEVICES
2.3.1 General
2.3.2 Zoning
2.3.3 End-of-line supervision
2.4 AUDIBLE WARNING DEVICES
2.5 ENVIRONMENTAL CONDITIONS
2.5.1 General environmental conditions
2.5.2 Special environmental conditions
2.6 WIRING
2.6.1 General
2.6.2 Type of wiring
2.6.3 Stress on conductors and terminals
2.6.4 Protection of wiring
2.7 JOINTINGS
2.8 FLEXIBLE CONDUCTORS AND CONNECTIONS
2.9 TERMINATIONS
2.10 WIRE-FREE LINKS
2.11 COMMISSIONING
2.12 CLIENT TRAINING
SECTION 3 EQUIPMENT REQUIREMENTS
3.1 GENERAL REQUIREMENTS
3.2 ADDITIONAL FUNCTIONALITY
3.3 ENVIRONMENTAL CONDITIONS
3.4 ELECTROMAGNETIC CONFORMANCE COMPATIBILITY (EMC)
3.5 IMMUNITY
3.6 LOAD AND LINE CONDITIONS
3.6.1 Output overload
3.6.2 Input voltage variations
3.7 ENCLOSURES
3.8 TERMINALS
3.9 MARKING OF CONTROL EQUIPMENT
3.10 INSTRUCTIONS
3.11 POWER SUPPLIES
3.11.1 General
3.11.2 Performance
3.11.3 Low battery reporting
3.11.4 Automatic battery testing and fault reporting
3.11.5 Charger design
3.11.6 Charger rating
3.11.7 Mains supply isolation switch
3.12 POWER SUPPLY INDICATIONS
3.12.1 Mains indication
3.12.2 Charging indication
3.12.3 Battery indication
3.13 MARKING OF POWER SUPPLY EQUIPMENT
3.14 BATTERY REQUIREMENTS
3.14.1 General
3.14.2 Battery capacity
3.15 WIRE-FREE SYSTEMS
3.15.1 General
3.15.2 Immunity to in-band interference
3.15.3 Collision rate
3.15.4 Classification of wire-free systems
3.16 EQUIPMENT CLASSIFICATION
3.16.1 General
3.16.2 Class 1
3.16.3 Class 2
3.16.4 Class 3
3.16.5 Class 4
3.16.6 Class 5
SECTION 4 GENERAL OPERATIONAL PROCEDURES AND RESPONSIBILITIES
4.1 GENERAL RESPONSIBILITIES
4.2 CLIENT'S RESPONSIBILITIES
SECTION 5 MAINTENANCE AND SERVICE
5.1 SCOPE OF SECTION
5.2 MAINTENANCE
5.2.1 Routine maintenance
5.2.2 Emergency service
SECTION 6 RECORDS AND REPORTS
6.1 CLIENT AND EQUIPMENT RECORDS
6.2 MAINTENANCE RECORD
6.3 AUTHORITY FOR DISCONNECTING
6.4 LOGBOOK
APPENDIX A - APPLICATION TO RISK PROFILE
APPENDIX B - INDUSTRY TERMS
B1 DATA TRANSMISSION
B2 ENTRY/EXIT ROUTE
B3 INTERIOR
B4 ISOLATING
B5 MULTIPLEXING
B6 PERIMETER
APPENDIX C - STANDARDS RELATING TO BATTERIES AND BATTERY CHARGERS
C1 BATTERIES
C1.1 Galvanic cells and batteries in general
C1.2 Acid secondary cells and batteries
C1.3 Alkaline secondary cells and batteries
C1.4 Miscellaneous
C2 BATTERY CHARGERS
APPENDIX D - OCCUPANCY RATIO CALCULATIONS
D1 CALCULATION OF THE OCCUPATION RATIO OF THE MEDIUM BY SUPERVISORY SIGNALS
D2 CALCULATION OF THE OCCUPATION RATIO OF THE MEDIUM BY ALARM MESSAGES
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 2201.5:2008
Intruder alarm systems - Alarm transmission systems
-
AS/NZS 3016:2002
Electrical installations - Electric security fences
-
AS/NZS 3016:2002 A1
Electrical installations - Electric security fences: Amendment 1
-
AS/NZS 4421:2011
Guard and patrol security services
AS/NZS 2201.1:2007 INTRUDER ALARM SYSTEMS - CLIENT™S PREMISES-DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 RISK ASSESSMENT
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Alarmed area
1.5.2 Alarm condition
1.5.3 Alarm transmission equipment
1.5.4 Alarm warning device
1.5.5 Arming
1.5.6 Arming station
1.5.7 Client
1.5.8 Control equipment
1.5.9 Deliberately operated device
1.5.10 Detection circuits
1.5.11 Detection device
1.5.12 Disarming
1.5.13 Fault condition
1.5.14 Indicating equipment
1.5.15 Intruder alarm system
1.5.16 Monitored circuit
1.5.17 Monitoring centre
1.5.18 Partial arming/disarming
1.5.19 Power supply equipment
1.5.20 Remote access
1.5.21 Restricted key
1.5.22 Satellite siren
1.5.23 Security alarm company
1.5.24 Shell
1.5.25 System alarm
1.5.26 Tamper-detection device
1.5.27 Zone
SECTION 2 SYSTEM INSTALLATION REQUIREMENTS
2.1 GENERAL REQUIREMENTS
2.2 INSTALLATION
2.2.1 General
2.2.2 Control equipment and power supply location
2.2.3 Mounting
2.2.4 Tamper detection
2.2.5 Power supply equipment
2.2.6 Battery marking
2.2.7 Alarm transmission equipment
2.3 DETECTION DEVICES
2.3.1 General
2.3.2 Zoning
2.3.3 End-of-line supervision
2.4 AUDIBLE WARNING DEVICES
2.5 ENVIRONMENTAL CONDITIONS
2.5.1 General environmental conditions
2.5.2 Special environmental conditions
2.6 WIRING
2.6.1 General
2.6.2 Type of wiring
2.6.3 Stress on conductors and terminals
2.6.4 Protection of wiring
2.7 JOINTINGS
2.8 FLEXIBLE CONDUCTORS AND CONNECTIONS
2.9 TERMINATIONS
2.10 WIRE-FREE LINKS
2.11 COMMISSIONING
2.12 CLIENT TRAINING
SECTION 3 EQUIPMENT REQUIREMENTS
3.1 GENERAL REQUIREMENTS
3.2 ADDITIONAL FUNCTIONALITY
3.3 ENVIRONMENTAL CONDITIONS
3.4 ELECTROMAGNETIC CONFORMANCE COMPATIBILITY (EMC)
3.5 IMMUNITY
3.6 LOAD AND LINE CONDITIONS
3.6.1 Output overload
3.6.2 Input voltage variations
3.7 ENCLOSURES
3.8 TERMINALS
3.9 MARKING OF CONTROL EQUIPMENT
3.10 INSTRUCTIONS
3.11 POWER SUPPLIES
3.11.1 General
3.11.2 Performance
3.11.3 Low battery reporting
3.11.4 Automatic battery testing and fault reporting
3.11.5 Charger design
3.11.6 Charger rating
3.11.7 Mains supply isolation switch
3.12 POWER SUPPLY INDICATIONS
3.12.1 Mains indication
3.12.2 Charging indication
3.12.3 Battery indication
3.13 MARKING OF POWER SUPPLY EQUIPMENT
3.14 BATTERY REQUIREMENTS
3.14.1 General
3.14.2 Battery capacity
3.15 WIRE-FREE SYSTEMS
3.15.1 General
3.15.2 Immunity to in-band interference
3.15.3 Collision rate
3.15.4 Classification of wire-free systems
3.16 EQUIPMENT CLASSIFICATION
3.16.1 General
3.16.2 Class 1
3.16.3 Class 2
3.16.4 Class 3
3.16.5 Class 4
3.16.6 Class 5
SECTION 4 GENERAL OPERATIONAL PROCEDURES AND RESPONSIBILITIES
4.1 GENERAL RESPONSIBILITIES
4.2 CLIENT'S RESPONSIBILITIES
SECTION 5 MAINTENANCE AND SERVICE
5.1 SCOPE OF SECTION
5.2 MAINTENANCE
5.2.1 Routine maintenance
5.2.2 Emergency service
SECTION 6 RECORDS AND REPORTS
6.1 CLIENT AND EQUIPMENT RECORDS
6.2 MAINTENANCE RECORD
6.3 AUTHORITY FOR DISCONNECTING
6.4 LOGBOOK
APPENDIX A - APPLICATION TO RISK PROFILE
APPENDIX B - INDUSTRY TERMS
B1 DATA TRANSMISSION
B2 ENTRY/EXIT ROUTE
B3 INTERIOR
B4 ISOLATING
B5 MULTIPLEXING
B6 PERIMETER
APPENDIX C - STANDARDS RELATING TO BATTERIES AND BATTERY CHARGERS
C1 BATTERIES
C1.1 Galvanic cells and batteries in general
C1.2 Acid secondary cells and batteries
C1.3 Alkaline secondary cells and batteries
C1.4 Miscellaneous
C2 BATTERY CHARGERS
APPENDIX D - OCCUPANCY RATIO CALCULATIONS
D1 CALCULATION OF THE OCCUPATION RATIO OF THE MEDIUM BY SUPERVISORY SIGNALS
D2 CALCULATION OF THE OCCUPATION RATIO OF THE MEDIUM BY ALARM MESSAGES
Previous versions
AS/NZS 2201.1:2007
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.