AS/NZS 2161.8:2024
Occupational protective gloves, Part 8: Protection against ionizing radiation and radioactive contamination
Standard identically adopts EN 421:2010, which specifies requirements and test methods for gloves to protect against ionizing radiation and radioactive contamination.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$139.50 NZD
|
|
| HardCopy |
$155.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2161.8:2024 Occupational protective gloves Protection against ionizing radiation and radioactive contamination, (EN 421:2010, IDT)
Preface
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Design principles
4.2.1 General principles
4.3 Attenuation efficiency and uniformity of distribution of protective material
4.4 Glove integrity
4.5 Mechanical requirements
4.6 Chemical requirements
4.7 Specific requirements for gloves for containment enclosures
4.7.1 General requirement for gloves for containment enclosures
4.7.2 Design for gloves for containment enclosures
4.7.3 Specific integrity test for gloves for containment enclosures
4.7.4 Resistance to ozone cracking (static strain)
5 Test methods
5.1 Determination of lead equivalent thickness and uniformity of distribution
5.1.1 Introduction
5.1.2 Sampling
5.1.3 Test conditions
5.1.4 Expression of results
5.1.5 Detection with an X-ray film
5.1.6 Detection with numeric films
5.1.7 Detection with an ionising chamber
5.2 Determination of glove integrity, air leak test
5.2.1 Principle
5.2.2 Sampling
5.2.3 Test apparatus
5.2.4 Test procedure
5.2.5 Test report
5.3 Determination of resistance to ozone cracking (Static Strain Method)
5.3.1 Procedure
5.3.2 Test conditions
5.3.3 Sampling
5.3.4 Reporting of results
5.4 Pull test for assemblages (sleeve and glove)
6 Marking
7 Information supplied by the manufacturer
Annex A (informative) Determination of water vapour permeability
Annex B (informative) Warning
Annex C (informative) Uncertainty of measurement and results interpretation
Annex D (informative) Significant technical changes between this European Standard and the previous edition
Annex E (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1338.2:2012
Filters for eye protectors - Part 2: Filters for protection against ultraviolet radiation -
AS/NZS 1338.3:2012
Filters for eye protectors - Part 3: Filters for protection against infra-red radiation -
AS/NZS 2161.10.1:2024
Occupational protective gloves, Part 10.1: Protective gloves against chemicals and micro-organisms - Terminology and performance requirements (ISO 374-1:2024, IDT)
-
AS/NZS 2161.10.2:2005
Occupational protective gloves - Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration
AS/NZS 2161.8:2024 Occupational protective gloves Protection against ionizing radiation and radioactive contamination, (EN 421:2010, IDT)
Preface
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 Design principles
4.2.1 General principles
4.3 Attenuation efficiency and uniformity of distribution of protective material
4.4 Glove integrity
4.5 Mechanical requirements
4.6 Chemical requirements
4.7 Specific requirements for gloves for containment enclosures
4.7.1 General requirement for gloves for containment enclosures
4.7.2 Design for gloves for containment enclosures
4.7.3 Specific integrity test for gloves for containment enclosures
4.7.4 Resistance to ozone cracking (static strain)
5 Test methods
5.1 Determination of lead equivalent thickness and uniformity of distribution
5.1.1 Introduction
5.1.2 Sampling
5.1.3 Test conditions
5.1.4 Expression of results
5.1.5 Detection with an X-ray film
5.1.6 Detection with numeric films
5.1.7 Detection with an ionising chamber
5.2 Determination of glove integrity, air leak test
5.2.1 Principle
5.2.2 Sampling
5.2.3 Test apparatus
5.2.4 Test procedure
5.2.5 Test report
5.3 Determination of resistance to ozone cracking (Static Strain Method)
5.3.1 Procedure
5.3.2 Test conditions
5.3.3 Sampling
5.3.4 Reporting of results
5.4 Pull test for assemblages (sleeve and glove)
6 Marking
7 Information supplied by the manufacturer
Annex A (informative) Determination of water vapour permeability
Annex B (informative) Warning
Annex C (informative) Uncertainty of measurement and results interpretation
Annex D (informative) Significant technical changes between this European Standard and the previous edition
Annex E (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC
Bibliography
Previous versions
AS/NZS 2161.8:2024
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.