AS/NZS 2033:2008
Installation of polyethylene pipe systems
Specifies methods for handling, storage, installation, testing and commissioning of polyethylene (PE) pipelines, above or below ground, for pressure and non-pressure applications conveying liquids.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$117.00 NZD
|
|
| HardCopy |
$130.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2033:2008 INSTALLATION OF POLYETHYLENE PIPE SYSTEMS
PREFACE
CONTENTS
SECTION 1 SCOPE, DEFINITIONS AND MATERIAL REQUIREMENTS
1.1 SCOPE
1.2 NORMATIVE REFERENCES
1.3 DEFINITIONS
1.3.1 Embankment and trench zones
1.3.2 Fixed point
1.3.3 Permeation
1.3.4 Shall
1.3.5 Should
SECTION 2 PRODUCTS AND MATERIALS
2.1 SCOPE OF SECTION
2.2 PIPE AND FITTINGS
2.2.1 PE pipes and fittings
2.2.2 Chemical resistance
2.2.3 Permeation
2.2.4 Elastomeric seals
2.2.5 Lubricants for elastomeric seals and expansion joints
2.3 HANGERS AND CLIPS
2.4 PIPE EMBEDMENT AND TRENCH-FILL MATERIALS
2.5 TOOLS AND EQUIPMENT
SECTION 3 GENERAL REQUIREMENTS
3.1 SCOPE OF SECTION
3.2 TRANSPORT, HANDLING AND STORAGE
3.2.1 General
3.2.2 Transportation
3.2.3 Storage
3.3 PRE-INSTALLATION INSPECTION
3.3.1 Correct supply
3.3.2 Cleanliness
3.3.3 Fitness for use
3.4 PROTECTION AGAINST DAMAGE
3.4.1 General
3.4.2 Protection from heat
3.5 REPLACEMENT OF METALLIC WATER SUPPLY PIPELINES
3.6 STATIC ELECTRICITY
3.7 TEMPERATURE CONSIDERATIONS
3.7.1 Pressure re-rating due to thermal effects
3.7.2 Provision for expansion and contraction
3.8 EFFECT OF WATER HAMMER OR PRESSURE SURGES
SECTION 4 JOINTING METHODS
4.1 SCOPE OF SECTION
4.2 FUSION JOINTS
4.3 MECHANICAL COMPRESSION FITTINGS
4.4 ELASTOMERIC SEAL JOINTS
4.4.1 Application
4.4.2 Procedure
4.5 FLANGED JOINTS
4.5.1 Application
4.5.2 Requirements
4.5.3 Procedure
4.6 THREADED JOINTS
4.6.1 Application
4.6.2 Procedure
4.7 REPAIR FITTINGS
4.8 CONNECTION OF PE PIPES AND FITTINGS TO PIPES AND FITTINGS OF OTHER MATERIALS-OTHER THAN THREADS AND FLANGES
4.9 SERVICE CONNECTIONS
SECTION 5 INSTALLATION OF BURIED PIPES AND FITTINGS
5.1 SCOPE OF SECTION
5.2 PIPELINE INSTALLATION USING TRENCHLESS TECHNOLOGY
5.3 PIPE INSTALLATION IN A TRENCH
5.3.1 Provision of a trench
5.3.2 Excavation across improved surfaces
5.3.3 Minimum cover
5.3.4 Buckling under external load and vacuum
5.3.5 Anchorage
5.3.6 Encasement in concrete
5.3.7 Foundations and foundation stabilization
5.3.8 Prevention of flotation
5.3.9 Trench floor preparation
5.3.10 Placement of bedding
5.3.11 Pipe laying and jointing
5.3.12 Bending of pipes
5.3.13 Pipe embedment
5.3.14 Trench fill
5.3.15 Removal of trench supports, pegs and packing
5.3.16 Marking tape
5.4 PIPE INSTALLATION IN AN EMBANKMENT
SECTION 6 INSTALLATION OF PIPES ABOVE GROUND
6.1 SCOPE OF SECTION
6.2 INSTALLATION REQUIREMENTS
6.2.1 Grade and alignment
6.2.2 Pipe bending
6.2.3 Setting of pipes in concrete
6.2.4 Pipes passing through floors and walls
6.2.5 Pipe installation in a sleeve or duct
6.2.6 Penetration of fire-resistant structures
6.3 SUPPORT OF PIPELINES
6.3.1 Supports
6.3.2 Spacing of supports
6.4 PROVISION FOR EXPANSION
6.4.1 General
6.4.2 Maximum spacing of expansion joints
6.4.3 Alternative provision for expansion
6.4.4 Installation of expansion joints
SECTION 7 TESTING OF PIPE SYSTEM
7.1 SCOPE OF SECTION
7.2 TESTING OF PRESSURE PIPE SYSTEMS
7.2.1 Pre-test precautions
7.2.2 General requirements
7.2.3 Basic pressure test (Visual)
7.2.4 General pressure test (Technical)
7.2.5 Joints between test sections
7.3 TESTING OF NON-PRESSURE PIPELINES
7.3.1 General
7.3.2 Method 1-Hydrostatic test
7.3.3 Method 2-Low pressure air test
7.3.4 Method 3-Vacuum testing
7.4 DEFLECTION TESTING
7.5 CLOSED CIRCUIT TELEVISION (CCTV) INSPECTION
SECTION 8 COMMISSIONING
SECTION 9 COMPRESSED GASES
9.1 SCOPE
9.2 CONTENTS IDENTIFICATION
9.3 PRESSURE RATING (PN, SDR) AND TEMPERATURE RERATING
9.4 JOINT TYPES
9.5 CHEMICAL RESISTANCE
9.6 UV RESISTANCE
9.7 PRECAUTIONS
APPENDIX A - BIBLIOGRAPHY
APPENDIX B - COMMISSIONING GUIDE
B1 GENERAL
B2 REMOVAL OF PARTICULATE MATERIALS
B3 WATER QUALITY
B3.1 Disinfection
B3.2 Materials extracted from the pipe or fittings during service
B4 COMMISSIONING PROCEDURE AND ACCEPTANCE CRITERIA
B5 PROCEDURE FOR DRINKING WATER SUPPLY PIPELINES
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Polyethylene maintenance shafts
Related Information
Building Code Compliance Document E1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 2033:2008(AS/NZS)A1.
Building Code Compliance Document G14
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Refers to 2033:2008(AS/NZS)A1.
Building Code Compliance Document E1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 2033:2008(AS/NZS)A2.
Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Building Code Compliance Document G13
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 2033:2008(AS/NZS)A1.
Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to 2033:2008(AS/NZS)A1.
Building Code Compliance Document G14
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Building Code Compliance Document E1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Building Code Compliance Document G13
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Building Code Compliance Document G14
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: VM1
Citation context:Refers to 2033:2008(AS/NZS)A2.
Building Code Compliance Document G12
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Refers to AS/NZS 2033:2008 A1,A2
Similar Standards
-
AS/NZS 1254:2010
PVC-U pipes and fittings for stormwater and surface water applications
-
AS/NZS 1254:2010 A1
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 1 -
AS/NZS 1254:2010 A2
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 2 -
AS/NZS 1254:2010 A3
PVC-U pipes and fittings for stormwater and surface water applications: Amendment 3
AS/NZS 2033:2008 INSTALLATION OF POLYETHYLENE PIPE SYSTEMS
PREFACE
CONTENTS
SECTION 1 SCOPE, DEFINITIONS AND MATERIAL REQUIREMENTS
1.1 SCOPE
1.2 NORMATIVE REFERENCES
1.3 DEFINITIONS
1.3.1 Embankment and trench zones
1.3.2 Fixed point
1.3.3 Permeation
1.3.4 Shall
1.3.5 Should
SECTION 2 PRODUCTS AND MATERIALS
2.1 SCOPE OF SECTION
2.2 PIPE AND FITTINGS
2.2.1 PE pipes and fittings
2.2.2 Chemical resistance
2.2.3 Permeation
2.2.4 Elastomeric seals
2.2.5 Lubricants for elastomeric seals and expansion joints
2.3 HANGERS AND CLIPS
2.4 PIPE EMBEDMENT AND TRENCH-FILL MATERIALS
2.5 TOOLS AND EQUIPMENT
SECTION 3 GENERAL REQUIREMENTS
3.1 SCOPE OF SECTION
3.2 TRANSPORT, HANDLING AND STORAGE
3.2.1 General
3.2.2 Transportation
3.2.3 Storage
3.3 PRE-INSTALLATION INSPECTION
3.3.1 Correct supply
3.3.2 Cleanliness
3.3.3 Fitness for use
3.4 PROTECTION AGAINST DAMAGE
3.4.1 General
3.4.2 Protection from heat
3.5 REPLACEMENT OF METALLIC WATER SUPPLY PIPELINES
3.6 STATIC ELECTRICITY
3.7 TEMPERATURE CONSIDERATIONS
3.7.1 Pressure re-rating due to thermal effects
3.7.2 Provision for expansion and contraction
3.8 EFFECT OF WATER HAMMER OR PRESSURE SURGES
SECTION 4 JOINTING METHODS
4.1 SCOPE OF SECTION
4.2 FUSION JOINTS
4.3 MECHANICAL COMPRESSION FITTINGS
4.4 ELASTOMERIC SEAL JOINTS
4.4.1 Application
4.4.2 Procedure
4.5 FLANGED JOINTS
4.5.1 Application
4.5.2 Requirements
4.5.3 Procedure
4.6 THREADED JOINTS
4.6.1 Application
4.6.2 Procedure
4.7 REPAIR FITTINGS
4.8 CONNECTION OF PE PIPES AND FITTINGS TO PIPES AND FITTINGS OF OTHER MATERIALS-OTHER THAN THREADS AND FLANGES
4.9 SERVICE CONNECTIONS
SECTION 5 INSTALLATION OF BURIED PIPES AND FITTINGS
5.1 SCOPE OF SECTION
5.2 PIPELINE INSTALLATION USING TRENCHLESS TECHNOLOGY
5.3 PIPE INSTALLATION IN A TRENCH
5.3.1 Provision of a trench
5.3.2 Excavation across improved surfaces
5.3.3 Minimum cover
5.3.4 Buckling under external load and vacuum
5.3.5 Anchorage
5.3.6 Encasement in concrete
5.3.7 Foundations and foundation stabilization
5.3.8 Prevention of flotation
5.3.9 Trench floor preparation
5.3.10 Placement of bedding
5.3.11 Pipe laying and jointing
5.3.12 Bending of pipes
5.3.13 Pipe embedment
5.3.14 Trench fill
5.3.15 Removal of trench supports, pegs and packing
5.3.16 Marking tape
5.4 PIPE INSTALLATION IN AN EMBANKMENT
SECTION 6 INSTALLATION OF PIPES ABOVE GROUND
6.1 SCOPE OF SECTION
6.2 INSTALLATION REQUIREMENTS
6.2.1 Grade and alignment
6.2.2 Pipe bending
6.2.3 Setting of pipes in concrete
6.2.4 Pipes passing through floors and walls
6.2.5 Pipe installation in a sleeve or duct
6.2.6 Penetration of fire-resistant structures
6.3 SUPPORT OF PIPELINES
6.3.1 Supports
6.3.2 Spacing of supports
6.4 PROVISION FOR EXPANSION
6.4.1 General
6.4.2 Maximum spacing of expansion joints
6.4.3 Alternative provision for expansion
6.4.4 Installation of expansion joints
SECTION 7 TESTING OF PIPE SYSTEM
7.1 SCOPE OF SECTION
7.2 TESTING OF PRESSURE PIPE SYSTEMS
7.2.1 Pre-test precautions
7.2.2 General requirements
7.2.3 Basic pressure test (Visual)
7.2.4 General pressure test (Technical)
7.2.5 Joints between test sections
7.3 TESTING OF NON-PRESSURE PIPELINES
7.3.1 General
7.3.2 Method 1-Hydrostatic test
7.3.3 Method 2-Low pressure air test
7.3.4 Method 3-Vacuum testing
7.4 DEFLECTION TESTING
7.5 CLOSED CIRCUIT TELEVISION (CCTV) INSPECTION
SECTION 8 COMMISSIONING
SECTION 9 COMPRESSED GASES
9.1 SCOPE
9.2 CONTENTS IDENTIFICATION
9.3 PRESSURE RATING (PN, SDR) AND TEMPERATURE RERATING
9.4 JOINT TYPES
9.5 CHEMICAL RESISTANCE
9.6 UV RESISTANCE
9.7 PRECAUTIONS
APPENDIX A - BIBLIOGRAPHY
APPENDIX B - COMMISSIONING GUIDE
B1 GENERAL
B2 REMOVAL OF PARTICULATE MATERIALS
B3 WATER QUALITY
B3.1 Disinfection
B3.2 Materials extracted from the pipe or fittings during service
B4 COMMISSIONING PROCEDURE AND ACCEPTANCE CRITERIA
B5 PROCEDURE FOR DRINKING WATER SUPPLY PIPELINES
Previous versions
AS/NZS 2033:2008
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.