AS/NZS 1554.4:2014
Structural steel welding - Part 4: Welding of high strength quenched and tempered steels
Provides rules for the welding of a wide range of steel constructions, using high strength quenched and tempered steel parent material.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$243.90 NZD
|
|
| HardCopy |
$271.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1554.4:2014 STRUCTURAL STEEL WELDING - WELDING OF HIGH STRENGTH QUENCHED AND TEMPERED STEELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 EXCLUSIONS
1.3 INNOVATION
1.4 NORMATIVE REFERENCES
1.5 DEFINITIONS
1.5.1 Fabricator
1.5.2 Inspecting authority
1.5.3 Inspector
1.5.4 May
1.5.5 Principal
1.5.6 Shall
1.5.7 Should
1.6 WELD CATEGORIES
1.7 MANAGEMENT OF QUALITY
1.7.1 Quality management
1.7.2 Basic welding requirements
1.8 SAFETY
1.8.1 Safety equipment and procedures
1.8.2 Welding equipment
1.8.3 Other hazards
SECTION 2 MATERIALS OF CONSTRUCTION
2.1 PARENT MATERIAL
2.2 BACKING MATERIAL
2.3 WELDING CONSUMABLES
2.3.1 Electrodes and filler wires
2.3.2 Care of electrodes and filler wires
2.3.3 Flux
2.3.4 Shielding gas
SECTION 3 DETAILS OF WELDED CONNECTIONS
3.1 GENERAL
3.1.1 Permissible weld types
3.1.2 Design stresses
3.1.3 Drawings
3.2 BUTT WELDS
3.2.1 Size of weld
3.2.2 Design throat thickness
3.2.3 Effective length
3.2.4 Effective area
3.2.5 Transition of thickness or width
3.3 FILLET WELDS
3.3.1 Size of weld
3.3.2 Design throat thickness
3.3.3 Effective length
3.3.4 Effective area
3.3.5 Minimum size of fillet welds
3.3.6 Maximum size of fillet welds along edges
3.4 COMPOUND WELDS
3.4.1 Description
3.4.2 Design throat thickness (DTT)
3.5 SEAL WELDS
3.6 PLUG WELDS
3.7 SLOT WELDS
SECTION 4 QUALIFICATION OF PROCEDURES AND PERSONNEL
4.1 QUALIFICATION OF WELDING PROCEDURE
4.1.1 General
4.1.2 Butt welds
4.1.3 Fillet welds
4.1.4 Qualification of multiple welding positions
4.2 METHOD FOR QUALIFYING A WELDING PROCEDURE
4.3 PREQUALIFIED WELDING PROCEDURES
4.3.1 Complying conditions
4.3.2 Non-complying conditions
4.4 PORTABILITY OF QUALIFIED WELDING PROCEDURES
4.5 PREQUALIFIED JOINT PREPARATIONS
4.5.1 General
4.5.2 Prequalified complete penetration butt welds
4.5.3 Prequalified incomplete penetration butt welds
4.5.4 Prequalified fillet welds
4.5.5 Additional requirements for welds in hollow section members
4.6 QUALIFICATION OF WELDING CONSUMABLES
4.6.1 Prequalified welding consumables [see Appendix D, Item (f)]
4.6.2 Qualification of welding consumables by testing
4.7 QUALIFICATION OF WELDING PROCEDURE BY TESTING
4.7.1 Method of qualification
4.7.2 Preparation of special test piece
4.7.3 Dimensions of test pieces
4.7.4 Macro tests
4.7.5 Transverse butt tensile tests
4.7.6 Bend tests
4.7.7 Charpy impact tests
4.7.8 Hardness comparison tests between parent metal and weld metal
4.7.9 Hardness tests for weld-heat-affected zones [see Appendix D, Item (i)]
4.7.10 Retests
4.8 EXTENSION OF QUALIFICATION
4.9 COMBINATION OF PROCESSES
4.10 RECORDS OF TESTS
4.11 REQUALIFICATION OF WELDING PROCEDURES
4.12 QUALIFICATION OF WELDING PERSONNEL
4.12.1 Welding supervisor [see Appendix D, Item (l)]
4.12.2 Welders [see Appendix D, Item (m)]
SECTION 5 WORKMANSHIP
5.1 PREPARATION OF EDGES FOR WELDING
5.1.1 General
5.1.2 Thermal cutting
5.2 ASSEMBLY
5.2.1 General
5.2.2 Alignment of butt-welded joints
5.2.3 Alignment of fillet welds and incomplete penetration butt welds
5.2.4 Backing material
5.3 PREHEATING AND INTER-RUN CONTROL
5.3.1 General
5.3.2 Need for preheating and interrun temperature control
5.3.3 Extent of preheating and cooling after welding
5.3.4 Determination of preheating temperature
5.4 WELDING UNDER ADVERSE WEATHER CONDITIONS
5.5 TACK WELDS
5.6 WELD DEPTH-TO-WIDTH RATIO
5.7 CONTROL OF DISTORTION AND RESIDUAL STRESS
5.7.1 General
5.7.2 Stressed parts
5.7.3 Peening
5.7.4 Correction of distortion
5.8 BACKGOUGING AND REPAIR OF DEFECTS IN WELDS
5.8.1 General
5.8.2 Removal of weld metal
5.8.3 Grinding
5.8.4 Stop/starts
5.9 TEMPORARY ATTACHMENTS
5.10 ARC STRIKES
5.11 CLEANING OF FINISHED WELDS
5.12 DRESSING OF BUTT WELDS
SECTION 6 QUALITY OF WELDS
6.1 CATEGORIES OF WELDS
6.2 METHODS OF INSPECTION AND PERMISSIBLE LEVELS OF IMPERFECTIONS
6.2.1 Methods of inspection of completed welds
6.2.2 Permissible levels of imperfection
6.2.3 Adjacent imperfections
6.2.4 Interpretation of tests
6.3 RADIOGRAPHY
6.3.1 Method (see Appendix D)
6.3.2 Image Quality Indicator (IQI) sensitivity
6.3.3 Acceptance limits
6.4 ULTRASONIC EXAMINATION
6.4.1 Method
6.4.2 Evaluation
6.4.3 Acceptance limits
6.5 MAGNETIC PARTICLE EXAMINATION
6.6 LIQUID PENETRANT EXAMINATION
6.7 WELD DEFECTS
6.8 REPORTING
SECTION 7 INSPECTION
7.1 GENERAL
7.2 QUALIFICATIONS OF INSPECTORS
7.3 VISUAL INSPECTION OF WORK
7.4 NON-DESTRUCTIVE EXAMINATION OTHER THAN VISUAL
APPENDIX A - NORMATIVE REFERENCED DOCUMENTS
APPENDIX B - BRITTLE FRACTURE
B1 METHODS
B2 NOTCH-DUCTILE RANGE METHOD
B3 DESIGN SERVICE TEMPERATURE
B3.1 General
B3.2 Basic design temperature
B3.3 Modifications to the basic design temperature
B4 MATERIAL SELECTION
B4.1 Selection of steel type
B4.2 Limitations
B4.3 Modification for certain applications
B5 FRACTURE ASSESSMENT
APPENDIX C - TYPICAL FORMS FOR WELDING PROCEDURES
APPENDIX D - MATTERS FOR RESOLUTION
APPENDIX E - WELDED JOINT AND PROCESS IDENTIFICATION
E1 NOTATION FOR JOINT IDENTIFICATION
E2 NOTATION FOR DIMENSIONS, POSITIONS AND BACKING MATERIAL
E3 NOTATION FOR PROCESSES
E4 EXAMPLE
APPENDIX F - WELD PROCEDURE REQUIREMENTS ASSOCIATED WITH CHANGES TO THE WELDING CONSUMABLE CLASSIFCATION SYSTEM
F1 GENERAL
F2 SYSTEM CHANGES
F2.1 Strength
F2.2 Impact resistance
F2.3 Flux designations (MMAW)
F2.4 Usability designations (FCAW)
F2.5 Positional designations
F2.6 Weld metal hydrogen
F3 EXTENSION OF WELD PROCEDURE QUALIFICATION
F4 OTHER PROCESSES
BIBLIOGRAPHY
Amendments
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification
Related Information
Approved code of practice for flammable liquids road tank wagons
Ministry: WorkSafe New Zealand
Section: 1.8 References
Citation context:AS/NZS 1554.4:2014 Structural steel welding – Part 4: Welding of high strength quenched and tempered steels
Approved code of practice for flammable liquids road tank wagons
Ministry: WorkSafe New Zealand
Section: 3.1
Citation context:WELDING All welding of components for structural or pressure purposes in building any new, or in modifying any existing vehicle for use as a tank wagon, is carried out in accordance with recognised good practice including: a. Welding of steel is in accordance with AS/NZS 1554 Structural Steel Welding parts 1, 4 and 5 (or equivalent) as appropriate. This includes all requirements for qualification of welding personnel... ...d. Inspection of the welding is carried out in accordance with the welding specification (AS/NZS 1554 or AS/NZS 1665 as relevant) including...
Similar Standards
-
AS/NZS 1554.1:2014
Structural steel welding - Part 1: Welding of steel structures -
AS/NZS 1554.1:2014 A1
Structural steel welding - Part 1: Welding of steel structures: Amendment 1 -
AS/NZS 1554.1:2014 A2
Structural steel welding - Part 1: Welding of steel structures: Amendment 2 -
AS/NZS 1554.2:2003
Structural steel welding - Stud welding (steel studs to steel)
AS/NZS 1554.4:2014 STRUCTURAL STEEL WELDING - WELDING OF HIGH STRENGTH QUENCHED AND TEMPERED STEELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 EXCLUSIONS
1.3 INNOVATION
1.4 NORMATIVE REFERENCES
1.5 DEFINITIONS
1.5.1 Fabricator
1.5.2 Inspecting authority
1.5.3 Inspector
1.5.4 May
1.5.5 Principal
1.5.6 Shall
1.5.7 Should
1.6 WELD CATEGORIES
1.7 MANAGEMENT OF QUALITY
1.7.1 Quality management
1.7.2 Basic welding requirements
1.8 SAFETY
1.8.1 Safety equipment and procedures
1.8.2 Welding equipment
1.8.3 Other hazards
SECTION 2 MATERIALS OF CONSTRUCTION
2.1 PARENT MATERIAL
2.2 BACKING MATERIAL
2.3 WELDING CONSUMABLES
2.3.1 Electrodes and filler wires
2.3.2 Care of electrodes and filler wires
2.3.3 Flux
2.3.4 Shielding gas
SECTION 3 DETAILS OF WELDED CONNECTIONS
3.1 GENERAL
3.1.1 Permissible weld types
3.1.2 Design stresses
3.1.3 Drawings
3.2 BUTT WELDS
3.2.1 Size of weld
3.2.2 Design throat thickness
3.2.3 Effective length
3.2.4 Effective area
3.2.5 Transition of thickness or width
3.3 FILLET WELDS
3.3.1 Size of weld
3.3.2 Design throat thickness
3.3.3 Effective length
3.3.4 Effective area
3.3.5 Minimum size of fillet welds
3.3.6 Maximum size of fillet welds along edges
3.4 COMPOUND WELDS
3.4.1 Description
3.4.2 Design throat thickness (DTT)
3.5 SEAL WELDS
3.6 PLUG WELDS
3.7 SLOT WELDS
SECTION 4 QUALIFICATION OF PROCEDURES AND PERSONNEL
4.1 QUALIFICATION OF WELDING PROCEDURE
4.1.1 General
4.1.2 Butt welds
4.1.3 Fillet welds
4.1.4 Qualification of multiple welding positions
4.2 METHOD FOR QUALIFYING A WELDING PROCEDURE
4.3 PREQUALIFIED WELDING PROCEDURES
4.3.1 Complying conditions
4.3.2 Non-complying conditions
4.4 PORTABILITY OF QUALIFIED WELDING PROCEDURES
4.5 PREQUALIFIED JOINT PREPARATIONS
4.5.1 General
4.5.2 Prequalified complete penetration butt welds
4.5.3 Prequalified incomplete penetration butt welds
4.5.4 Prequalified fillet welds
4.5.5 Additional requirements for welds in hollow section members
4.6 QUALIFICATION OF WELDING CONSUMABLES
4.6.1 Prequalified welding consumables [see Appendix D, Item (f)]
4.6.2 Qualification of welding consumables by testing
4.7 QUALIFICATION OF WELDING PROCEDURE BY TESTING
4.7.1 Method of qualification
4.7.2 Preparation of special test piece
4.7.3 Dimensions of test pieces
4.7.4 Macro tests
4.7.5 Transverse butt tensile tests
4.7.6 Bend tests
4.7.7 Charpy impact tests
4.7.8 Hardness comparison tests between parent metal and weld metal
4.7.9 Hardness tests for weld-heat-affected zones [see Appendix D, Item (i)]
4.7.10 Retests
4.8 EXTENSION OF QUALIFICATION
4.9 COMBINATION OF PROCESSES
4.10 RECORDS OF TESTS
4.11 REQUALIFICATION OF WELDING PROCEDURES
4.12 QUALIFICATION OF WELDING PERSONNEL
4.12.1 Welding supervisor [see Appendix D, Item (l)]
4.12.2 Welders [see Appendix D, Item (m)]
SECTION 5 WORKMANSHIP
5.1 PREPARATION OF EDGES FOR WELDING
5.1.1 General
5.1.2 Thermal cutting
5.2 ASSEMBLY
5.2.1 General
5.2.2 Alignment of butt-welded joints
5.2.3 Alignment of fillet welds and incomplete penetration butt welds
5.2.4 Backing material
5.3 PREHEATING AND INTER-RUN CONTROL
5.3.1 General
5.3.2 Need for preheating and interrun temperature control
5.3.3 Extent of preheating and cooling after welding
5.3.4 Determination of preheating temperature
5.4 WELDING UNDER ADVERSE WEATHER CONDITIONS
5.5 TACK WELDS
5.6 WELD DEPTH-TO-WIDTH RATIO
5.7 CONTROL OF DISTORTION AND RESIDUAL STRESS
5.7.1 General
5.7.2 Stressed parts
5.7.3 Peening
5.7.4 Correction of distortion
5.8 BACKGOUGING AND REPAIR OF DEFECTS IN WELDS
5.8.1 General
5.8.2 Removal of weld metal
5.8.3 Grinding
5.8.4 Stop/starts
5.9 TEMPORARY ATTACHMENTS
5.10 ARC STRIKES
5.11 CLEANING OF FINISHED WELDS
5.12 DRESSING OF BUTT WELDS
SECTION 6 QUALITY OF WELDS
6.1 CATEGORIES OF WELDS
6.2 METHODS OF INSPECTION AND PERMISSIBLE LEVELS OF IMPERFECTIONS
6.2.1 Methods of inspection of completed welds
6.2.2 Permissible levels of imperfection
6.2.3 Adjacent imperfections
6.2.4 Interpretation of tests
6.3 RADIOGRAPHY
6.3.1 Method (see Appendix D)
6.3.2 Image Quality Indicator (IQI) sensitivity
6.3.3 Acceptance limits
6.4 ULTRASONIC EXAMINATION
6.4.1 Method
6.4.2 Evaluation
6.4.3 Acceptance limits
6.5 MAGNETIC PARTICLE EXAMINATION
6.6 LIQUID PENETRANT EXAMINATION
6.7 WELD DEFECTS
6.8 REPORTING
SECTION 7 INSPECTION
7.1 GENERAL
7.2 QUALIFICATIONS OF INSPECTORS
7.3 VISUAL INSPECTION OF WORK
7.4 NON-DESTRUCTIVE EXAMINATION OTHER THAN VISUAL
APPENDIX A - NORMATIVE REFERENCED DOCUMENTS
APPENDIX B - BRITTLE FRACTURE
B1 METHODS
B2 NOTCH-DUCTILE RANGE METHOD
B3 DESIGN SERVICE TEMPERATURE
B3.1 General
B3.2 Basic design temperature
B3.3 Modifications to the basic design temperature
B4 MATERIAL SELECTION
B4.1 Selection of steel type
B4.2 Limitations
B4.3 Modification for certain applications
B5 FRACTURE ASSESSMENT
APPENDIX C - TYPICAL FORMS FOR WELDING PROCEDURES
APPENDIX D - MATTERS FOR RESOLUTION
APPENDIX E - WELDED JOINT AND PROCESS IDENTIFICATION
E1 NOTATION FOR JOINT IDENTIFICATION
E2 NOTATION FOR DIMENSIONS, POSITIONS AND BACKING MATERIAL
E3 NOTATION FOR PROCESSES
E4 EXAMPLE
APPENDIX F - WELD PROCEDURE REQUIREMENTS ASSOCIATED WITH CHANGES TO THE WELDING CONSUMABLE CLASSIFCATION SYSTEM
F1 GENERAL
F2 SYSTEM CHANGES
F2.1 Strength
F2.2 Impact resistance
F2.3 Flux designations (MMAW)
F2.4 Usability designations (FCAW)
F2.5 Positional designations
F2.6 Weld metal hydrogen
F3 EXTENSION OF WELD PROCEDURE QUALIFICATION
F4 OTHER PROCESSES
BIBLIOGRAPHY
Amendments
Previous versions
AS/NZS 1554.4:2014
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.