AS/NZS 1158.4:2015
Lighting for roads and public spaces - Part 4: Lighting of pedestrian crossings
Specifies performance requirements for designers of pedestrian crossings and manufacturers of luminaires in order to enhance the visibility and safety of pedestrians.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$100.80 NZD
|
|
| HardCopy |
$112.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1158.4:2015 LIGHTING FOR ROADS AND PUBLIC SPACES - LIGHTING OF PEDESTRIAN CROSSINGS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Aiming angle
1.4.2 Aiming point
1.4.3 Beam axis
1.4.4 Beam spread (in a particular plane)
1.4.5 Crossing width
1.4.6 Crossing zone
1.4.7 Initial lamp lumen
1.4.8 Lighting design
1.4.9 Lighting scheme
1.4.10 Relevant authority
1.4.11 Road controlling authority
1.4.12 Pedestrian crossing (otherwise commonly marked and referred to as a ‘zebra’ crossing), at grade (pavement level) crossings and raised (section of pavement) crossings
1.4.13 Surround zone
1.5 SYMBOLS AND ABBREVIATIONS
SECTION 2 DESIGN OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 DESIGN OBJECTIVES
2.2 LIGHT TECHNICAL PARAMETERS
2.2.1 General
2.2.2 Performance parameters
2.2.3 Environmental parameters
2.3 DESIGN LAMP LUMEN VALUE
2.4 COLOUR RENDERING
2.5 ENERGY AUDIT
2.5.1 General
2.5.2 Purpose
2.5.3 Parts
2.6 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.6.1 General
2.6.2 Luminaire maintenance factor
2.6.3 Light source lumen maintenance factor
2.6.4 Maintenance factor
SECTION 3 DESIGN METHODOLOGY, REQUIREMENTS, LIGHT TECHNICAL PARAMETERS AND CONCEPTS
3.1 GENERAL
3.1.1 Scope of Section
3.1.2 Calculations
3.2 DESIGN REQUIREMENTS (AUSTRALIA)
3.2.1 General
3.2.2 Lighting categories
3.2.3 Light technical parameters
3.2.4 Calculation of EPv
3.2.5 Pedestrian crossings over non-signalized slip lanes at otherwise signalized intersections
3.2.6 Road lighting in the vicinity of pedestrian crossings
3.2.7 Illuminance on the crossing surface
3.2.8 Surround zone illumination
3.2.9 Lighting equipment requirements
3.3 DESIGN REQUIREMENTS (NEW ZEALAND)
3.3.1 Traffic rule
3.3.2 Amber globes or disks at pedestrian crossings
3.3.3 Supplementary lighting
3.3.4 Lighting categories
3.3.5 Light technical parameters
SECTION 4 PROVISION OF LUMINAIRE DATA
APPENDIX A - GUIDE TO THE DESIGN OF PEDESTRIAN CROSSING SCHEMES (AUSTRALIA ONLY)
A1 INTRODUCTION
A2 CARRIAGEWAY WIDTH
A3 OVERHANG
A4 MOUNTING HEIGHT
A5 LOCATION AND AIMING OF PEDESTRIAN CROSSING LUMINAIRES
A5.1 Horizontal distance from luminaires to crossing centre-line
A5.2 Aiming of pedestrian crossing luminaires
APPENDIX B - DESIGN BRIEF
B1 SCOPE
B2 SITE PLANS
B3 PERFORMANCE REQUIREMENTS
B4 SPECIFIC REQUIREMENTS
APPENDIX C - BASIS OF COMPLIANCE
C1 COMPLIANCE OF THE DESIGN
C2 COMPLIANCE OF THE INSTALLATION
APPENDIX D - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
D1 GENERAL
D2 ENERGY AUDIT
APPENDIX E - LUMINAIRE MAINTENANCE FACTORS
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1158.0:2005
Lighting for roads and public spaces - Part 0: Introduction -
AS/NZS 1158.0:2005 A1
Lighting for roads and public spaces - Part 0: Introduction: Amendment 1 -
AS/NZS 1158.0:2005 A2
Lighting for roads and public spaces - Part 0: Introduction: Amendment 2 -
AS/NZS 1158.1.1:2022
Lighting for roads and public spaces - Vehicular traffic (Category V) lighting - Performance and design requirements
AS/NZS 1158.4:2015 LIGHTING FOR ROADS AND PUBLIC SPACES - LIGHTING OF PEDESTRIAN CROSSINGS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Aiming angle
1.4.2 Aiming point
1.4.3 Beam axis
1.4.4 Beam spread (in a particular plane)
1.4.5 Crossing width
1.4.6 Crossing zone
1.4.7 Initial lamp lumen
1.4.8 Lighting design
1.4.9 Lighting scheme
1.4.10 Relevant authority
1.4.11 Road controlling authority
1.4.12 Pedestrian crossing (otherwise commonly marked and referred to as a ‘zebra’ crossing), at grade (pavement level) crossings and raised (section of pavement) crossings
1.4.13 Surround zone
1.5 SYMBOLS AND ABBREVIATIONS
SECTION 2 DESIGN OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 DESIGN OBJECTIVES
2.2 LIGHT TECHNICAL PARAMETERS
2.2.1 General
2.2.2 Performance parameters
2.2.3 Environmental parameters
2.3 DESIGN LAMP LUMEN VALUE
2.4 COLOUR RENDERING
2.5 ENERGY AUDIT
2.5.1 General
2.5.2 Purpose
2.5.3 Parts
2.6 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.6.1 General
2.6.2 Luminaire maintenance factor
2.6.3 Light source lumen maintenance factor
2.6.4 Maintenance factor
SECTION 3 DESIGN METHODOLOGY, REQUIREMENTS, LIGHT TECHNICAL PARAMETERS AND CONCEPTS
3.1 GENERAL
3.1.1 Scope of Section
3.1.2 Calculations
3.2 DESIGN REQUIREMENTS (AUSTRALIA)
3.2.1 General
3.2.2 Lighting categories
3.2.3 Light technical parameters
3.2.4 Calculation of EPv
3.2.5 Pedestrian crossings over non-signalized slip lanes at otherwise signalized intersections
3.2.6 Road lighting in the vicinity of pedestrian crossings
3.2.7 Illuminance on the crossing surface
3.2.8 Surround zone illumination
3.2.9 Lighting equipment requirements
3.3 DESIGN REQUIREMENTS (NEW ZEALAND)
3.3.1 Traffic rule
3.3.2 Amber globes or disks at pedestrian crossings
3.3.3 Supplementary lighting
3.3.4 Lighting categories
3.3.5 Light technical parameters
SECTION 4 PROVISION OF LUMINAIRE DATA
APPENDIX A - GUIDE TO THE DESIGN OF PEDESTRIAN CROSSING SCHEMES (AUSTRALIA ONLY)
A1 INTRODUCTION
A2 CARRIAGEWAY WIDTH
A3 OVERHANG
A4 MOUNTING HEIGHT
A5 LOCATION AND AIMING OF PEDESTRIAN CROSSING LUMINAIRES
A5.1 Horizontal distance from luminaires to crossing centre-line
A5.2 Aiming of pedestrian crossing luminaires
APPENDIX B - DESIGN BRIEF
B1 SCOPE
B2 SITE PLANS
B3 PERFORMANCE REQUIREMENTS
B4 SPECIFIC REQUIREMENTS
APPENDIX C - BASIS OF COMPLIANCE
C1 COMPLIANCE OF THE DESIGN
C2 COMPLIANCE OF THE INSTALLATION
APPENDIX D - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
D1 GENERAL
D2 ENERGY AUDIT
APPENDIX E - LUMINAIRE MAINTENANCE FACTORS
Previous versions
AS/NZS 1158.4:2015
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.