AS/NZS 1158.1.1:1997
Road lighting - Vehicular traffic (Category V) lighting - Performance and installation design requirements
Sets out performance criteria and installation design requirements for Category V lighting as described in AS/NZS 1158.0, i.e. lighting for traffic routes, including arterial roads and freeways. Specifies the applicable lighting parameters and the values to be achieved. Also requires the provision of certain luminaire and installation design data. Reprinted to append Amendment 1:1998.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$94.50 NZD
|
|
| HardCopy |
$105.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1158.1.1:1997 ROAD LIGHTING - VEHICULAR TRAFFICE (CATEGORY V) LIGHTINGPERFORMANCE AND INSTALLATION DESIGN REQUIREMENTS
PREFACE
For Australian designers:
For New Zealand designers:
For Australian and New Zealand designers:
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.4 SYMBOLS AND ABBREVIATIONS
1.5 LIGHTING CATEGORIES AND THEIR APPLICATION
SECTION 2 OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 GENERAL OBJECTIVE
2.2 DESIGN OBJECTIVES
2.3 LIGHT TECHNICAL PARAMETERS
2.3.1 General
2.3.2 Applicable parameters
2.4 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.5 BASIS OF COMPLIANCE
SECTION 3 INSTALLATION DESIGN METHODS AND RULES
3.1 BASIS OF DESIGN
3.2 STRAIGHT SECTIONS
3.2.1 Design method
3.2.2 Design rules
3.3 CURVES
3.3.1 Application of design methods
3.3.2 Curves pacing chart
3.3.3 Computer calculations (luminance-based)
3.3.4 Computer calculations (illuminance-based)
3.4 INTERSECTIONS, JUNCTIONS AND OTHER SPECIFIED LOCATIONS
3.4.1 General
3.4.2 Luminance-based requirements
3.4.3 Illuminance-based requirements
3.5 ISOLATED INTERSECTIONS AND JUNCTIONS
3.5.1 Application
3.5.2 Design rules
3.6 UPWARD WASTE LIGHT RATIO
SECTION 4 PROVISION OF LUMINAIRE DATA AND INSTALLATION DESIGN AIDS
4.1 LUMINAIRE DATA
4.2 INSTALLATION DESIGN AIDS
4.2.1 Basis of preparation
4.2.2 Luminaire spacing tables
4.2.3 Luminaire performance tables
4.2.4 Isolux diagrams
APPENDIX A - REFERENCED AND RELATED DOCUMENTS
A1 REFERENCED DOCUMENTS
A2 RELATED DOCUMENTS
APPENDIX B - GENERAL RELATIONSHIP BETWEEN LIGHTING CATEGORIES APPLICABLE TO TRAFFIC ROUTES
APPENDIX C - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
ASNZS1158.1.1-1997A1.pdf
Amendments
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Traffic Control Devices Manual - Part 8 - Code of practice for temporary traffic management (CoPTTM) - Section C
Ministry: NZ Transport Agency
Section: C13.2.10
Citation context:This may mean that artificial lighting to the appropriate level required by Australian and New Zealand Standard 1158.1.1:1997 Road lighting - Vehicular traffic (Category V) lighting - Performance and installation design requirements (AS/NZS 1158.1.1:1997) has to be installed.
Similar Standards
-
AS/NZS 1158.0:2005
Lighting for roads and public spaces - Part 0: Introduction -
AS/NZS 1158.0:2005 A1
Lighting for roads and public spaces - Part 0: Introduction: Amendment 1 -
AS/NZS 1158.0:2005 A2
Lighting for roads and public spaces - Part 0: Introduction: Amendment 2 -
AS/NZS 1158.1.1:2022
Lighting for roads and public spaces - Vehicular traffic (Category V) lighting - Performance and design requirements
AS/NZS 1158.1.1:1997 ROAD LIGHTING - VEHICULAR TRAFFICE (CATEGORY V) LIGHTINGPERFORMANCE AND INSTALLATION DESIGN REQUIREMENTS
PREFACE
For Australian designers:
For New Zealand designers:
For Australian and New Zealand designers:
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.4 SYMBOLS AND ABBREVIATIONS
1.5 LIGHTING CATEGORIES AND THEIR APPLICATION
SECTION 2 OBJECTIVES AND LIGHT TECHNICAL PARAMETERS
2.1 GENERAL OBJECTIVE
2.2 DESIGN OBJECTIVES
2.3 LIGHT TECHNICAL PARAMETERS
2.3.1 General
2.3.2 Applicable parameters
2.4 MAINTENANCE OF LIGHT TECHNICAL PARAMETERS
2.5 BASIS OF COMPLIANCE
SECTION 3 INSTALLATION DESIGN METHODS AND RULES
3.1 BASIS OF DESIGN
3.2 STRAIGHT SECTIONS
3.2.1 Design method
3.2.2 Design rules
3.3 CURVES
3.3.1 Application of design methods
3.3.2 Curves pacing chart
3.3.3 Computer calculations (luminance-based)
3.3.4 Computer calculations (illuminance-based)
3.4 INTERSECTIONS, JUNCTIONS AND OTHER SPECIFIED LOCATIONS
3.4.1 General
3.4.2 Luminance-based requirements
3.4.3 Illuminance-based requirements
3.5 ISOLATED INTERSECTIONS AND JUNCTIONS
3.5.1 Application
3.5.2 Design rules
3.6 UPWARD WASTE LIGHT RATIO
SECTION 4 PROVISION OF LUMINAIRE DATA AND INSTALLATION DESIGN AIDS
4.1 LUMINAIRE DATA
4.2 INSTALLATION DESIGN AIDS
4.2.1 Basis of preparation
4.2.2 Luminaire spacing tables
4.2.3 Luminaire performance tables
4.2.4 Isolux diagrams
APPENDIX A - REFERENCED AND RELATED DOCUMENTS
A1 REFERENCED DOCUMENTS
A2 RELATED DOCUMENTS
APPENDIX B - GENERAL RELATIONSHIP BETWEEN LIGHTING CATEGORIES APPLICABLE TO TRAFFIC ROUTES
APPENDIX C - DOCUMENTATION REQUIRED FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
ASNZS1158.1.1-1997A1.pdf
Amendments
AS/NZS 1158.1.1:1997
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.