AS/NZS 1067:2003
Sunglasses and fashion spectacles
Proposes a specification of physical properties for sunglasses and sunglass lenses of nominal plano power, and which are not prescription lenses, intended for protection against solar radiation for general use, for social and domestic purposes, including road use and driving.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$147.60 NZD
|
|
| HardCopy |
$164.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1067:2003 SUNGLASSES AND FASHION SPECTACLES
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Absorptance (absorption)
1.4.2 Afocal lens
1.4.3 Air mass (1 and 2)
1.4.4 Corresponding points
1.4.5 Fashion spectacles
1.4.6 Goggle
1.4.7 Infra red radiation
1.4.8 Lens power
1.4.9 Luminous density
1.4.10 Luminous transmittance
1.4.11 Optical radiation
1.4.12 Photochromic sunglass lens
1.4.13 Polarizing sunglass lens
1.4.14 Prismatic power
1.4.15 Reference points of afocal lenses
1.4.16 Relative visual attenuation quotient for signal light detection
1.4.17 Signal light transmittance
1.4.18 Solar blue-light transmittance
1.4.19 Solar infrared transmittance
1.4.20 Solar UV transmittance
1.4.21 Solar UVA transmittance
1.4.22 Solar UVB transmittance
1.4.23 Spectral transmittance
1.4.24 Standard illuminant
1.4.25 Visible radiation
1.4.26 UV radiation
1.5 NOTATION
1.6 EQUATIONS
1.6.1 Luminous transmittance (see Clause 1.4.10)
1.6.2 Signal light transmittance (see Clause 1.4.17)
1.6.3 Relative visual attenuation quotient for signal light detection (see Clause 1.4.16)
1.6.4 Solar blue-light transmittance (see Clause 1.4.18)
1.6.5 Solar infrared transmittance (see Clause 1.4.19)
1.6.6 Solar UV transmittance (see Clause 1.4.20)
1.6.7 Solar UVA transmittance (see Clause 1.4.21)
1.6.8 Solar UVB transmittance (see Clause 1.4.22)
SECTION 2 REQUIREMENTS FOR SUNGLASS LENSES
2.1 TRANSMITTANCE REQUIREMENTS AND LENS CATEGORIES
2.1.1 Lens categories
2.1.2 Transmittance requirements
2.1.3 Claims of luminous transmittance
2.2 OTHER TRANSMITTANCE REQUIREMENTS
2.2.1 Uniformity of luminous transmittance of uniformly tinted sunglass lenses
2.2.2 Transmittance matching for pairs of sunglass lenses of all types
2.2.3 Uniformity of colour for pairs of sunglass lenses of all types
2.3 SPECIAL TRANSMITTANCE REQUIREMENTS
2.3.1 Photochromic lenses
2.3.2 Polarizing lenses
2.3.3 Gradient lenses
2.4 CLAIMED TRANSMITTANCE PROPERTIES
2.4.1 General
2.4.2 Blue-light absorption/transmittance
2.4.3 UV absorption/transmittance
2.5 OPTICAL POWER OF LENSES
2.5.1 Spherical and cylindrical power
2.5.2 Local aberrations in spherical and cylindrical power
2.5.3 Prismatic power-Individual unmounted lenses
2.5.4 Prismatic power difference-Assembled sunglasses
2.6 SCATTERED LIGHT
2.7 MATERIAL AND SURFACE QUALITY
2.8 RESISTANCE TO RADIATION
2.9 IGNITION
SECTION 3 REQUIREMENTS FOR ASSEMBLED SUNGLASSES
3.1 GENERAL CONSTRUCTION
3.2 EYE COVERAGE AND FIELD OF VIEW
3.2.1 Eye coverage
3.2.2 Field of view
3.3 DIMENSIONAL TOLERANCE
3.4 MECHANICAL REQUIREMENTS
3.4.1 Security of the lenses in the frame
3.4.2 Impact resistant sunglasses and fashion spectacles
3.5 IGNITION
3.6 MATERIALS FOR THE MANUFACTURE OF ASSEMBLED SUNGLASSES
SECTION 4 MARKING AND LABELLING
4.1 INFORMATION TO BE SUPPLIED
4.1.1 All assembled sunglasses and individual sunglass lenses
4.1.2 Category 1 lenses
4.1.3 Category 4 lenses
4.1.4 Photochromic lenses
4.1.5 Category 0 to 3 lenses
4.1.6 Driving warnings
4.2 METHODS OF MARKING AND LABELLING
4.2.1 Form of labelling
4.2.2 Durability
4.2.3 Legibility
4.3 TRANSMITTANCE CLAIMS
4.4 IMPACT RESISTANCE
APPENDIX A - USE OF SUNGLASS LENSES
A1 ADVANTAGES OF SUNGLASSES
A2 INAPPROPRIATE USE OF SUNGLASSES
A2.1 Artificial sources
A2.2 Observation of the sun
A2.3 Use of sunglasses in reduced light
A2.4 Photochromic lenses
A3 VARIABILITY OF PHOTOCHROMIC SUNGLASS LENSES
A4 BLUE-LIGHT HAZARD
A5 INFRA-RED RISK
A6 UV RISK
APPENDIX B - MEASUREMENT OF SPECTRAL TRANSMITTANCE AND CALCULATIONS OF LENS TRANSMITTANCES AND SIGNAL ATTENUATION QUOTIENTS
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 CALIBRATION OF THE SPECTROPHOTOMETER
B5 PROCEDURES
B5.1 Uniformly tinted lenses (non-polarizing)
B5.2 Uniformly tinted lenses (polarizing)
B5.3 Gradient density tinted lenses (non-polarizing)
B5.4 Gradient density tinted lenses (polarizing)
B5.5 Photochromic lenses
B6 CALCULATIONS
B6.1 Luminous transmittance
B6.2 Infrared transmittance
B6.3 Ultraviolet transmittance
B6.4 Recognition of signal lights
B7 Uniformity of luminous transmittance
APPENDIX C - SPECTRAL FUNCTIONS
C1 SCOPE
APPENDIX D - TEST FOR SPHERICAL, CYLINDRICAL AND PRISMATIC POWERS
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 PROCEDURE
D4.1 Spherical and cylindrical power
D4.2 Prismatic power-single lenses
D5 REPORTING OF RESULTS
APPENDIX E - DETERMINATION OF LOCAL ABERRATIONS IN SPHERICAL AND CYLINDRICAL POWER
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E4 PROCEDURE
E5 REPORTING OF RESULTS
APPENDIX F - DETERMINATION OF THE DIFFERENCE IN PRISMATIC POWER FOR PAIRS OF LENSES OR ASSEMBLED SUNGLASSES
F1 SCOPE
F2 PRINCIPLE
F3 APPARATUS
F4 PROCEDURE
F5 REPORTING OF RESULTS
APPENDIX G - LIGHT DIFFUSION TEST
G1 SCOPE
G2 PRINCIPLE
G3 TEST METHODS
G3.1 General
G3.2 Primary method
G3.3 Secondary method
APPENDIX H - ASSESSMENT OF QUALITY OF MATERIAL AND SURFACE
H1 SCOPE
H2 PRINCIPLE
H3 PROCEDURE
H3.1 General
H3.2 Method A
H3.3 Method B
H4 REPORTING OF RESULTS
APPENDIX I - TEST FOR RESISTANCE TO ULTRAVIOLET RADIATION
I1 SCOPE
I2 PRINCIPLE
I3 APPARATUS
I4 PROCEDURE
I5 INSPECTION
I6 REPORTING OF RESULTS
APPENDIX J - TEST FOR RESISTANCE TO IGNITION
J1 SCOPE
J2 PRINCIPLE
J3 APPARATUS
J3.1 Steel rod
J3.2 Heat source
J3.3 Thermocouple and temperature indicating device
J3.4 Timer
J4 PROCEDURE
J5 INSPECTION
J6 REPORTING OF RESULTS
APPENDIX K - DETERMINATION OF ROBUSTNESS AND LENS RETENTION
K1 SCOPE
K2 PRINCIPLE
K3 APPARATUS
K4 PROCEDURE
K5 REPORTING OF RESULTS
APPENDIX L - DETERMINATION OF REFERENCE POINTS
L1 SCOPE
L2 PRINCIPLE
L3 APPARATUS
L4 METHODS
L4.1 Assembled sunglasses
L4.2 Single lenses
L4.3 Uncut lenses
L4.4 Children's sunglasses
Amendments
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Safety of laser products - Part 3: Guidance for laser displays and shows
Laser safety - Safety of products with optical sources, exclusively used for visible information transmission to the human eye
Laser safety - Safety of products emitting infrared optical radiation, exclusively used for wireless free air data transmission and surveillance
Laser safety - Compilation of maximum permissible exposure to incoherent optical radiation
Solaria for cosmetic purposes
Related Information
Occupational Health Tools 2009
Ministry: WorkSafe New Zealand
Section: Ultraviolet (UV) Exposures
Citation context:Personal protection: Cover as much skin as possible by wearing:... ...sunglasses (that comply with the AS/NZS1067.1).(sic)
Similar Standards
-
AS/NZS 1067.1:2016
Eye and face protection - Sunglasses and fashion spectacles - Part 1: Requirements -
AS/NZS 1067.2:2016
Eye and face protection - Sunglasses and fashion spectacles - Part 2: Test methods -
AS/NZS 1270:2002
Acoustics - Hearing protectors
-
AS/NZS 1336:2014
Eye and face protection - Guidelines
AS/NZS 1067:2003 SUNGLASSES AND FASHION SPECTACLES
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Absorptance (absorption)
1.4.2 Afocal lens
1.4.3 Air mass (1 and 2)
1.4.4 Corresponding points
1.4.5 Fashion spectacles
1.4.6 Goggle
1.4.7 Infra red radiation
1.4.8 Lens power
1.4.9 Luminous density
1.4.10 Luminous transmittance
1.4.11 Optical radiation
1.4.12 Photochromic sunglass lens
1.4.13 Polarizing sunglass lens
1.4.14 Prismatic power
1.4.15 Reference points of afocal lenses
1.4.16 Relative visual attenuation quotient for signal light detection
1.4.17 Signal light transmittance
1.4.18 Solar blue-light transmittance
1.4.19 Solar infrared transmittance
1.4.20 Solar UV transmittance
1.4.21 Solar UVA transmittance
1.4.22 Solar UVB transmittance
1.4.23 Spectral transmittance
1.4.24 Standard illuminant
1.4.25 Visible radiation
1.4.26 UV radiation
1.5 NOTATION
1.6 EQUATIONS
1.6.1 Luminous transmittance (see Clause 1.4.10)
1.6.2 Signal light transmittance (see Clause 1.4.17)
1.6.3 Relative visual attenuation quotient for signal light detection (see Clause 1.4.16)
1.6.4 Solar blue-light transmittance (see Clause 1.4.18)
1.6.5 Solar infrared transmittance (see Clause 1.4.19)
1.6.6 Solar UV transmittance (see Clause 1.4.20)
1.6.7 Solar UVA transmittance (see Clause 1.4.21)
1.6.8 Solar UVB transmittance (see Clause 1.4.22)
SECTION 2 REQUIREMENTS FOR SUNGLASS LENSES
2.1 TRANSMITTANCE REQUIREMENTS AND LENS CATEGORIES
2.1.1 Lens categories
2.1.2 Transmittance requirements
2.1.3 Claims of luminous transmittance
2.2 OTHER TRANSMITTANCE REQUIREMENTS
2.2.1 Uniformity of luminous transmittance of uniformly tinted sunglass lenses
2.2.2 Transmittance matching for pairs of sunglass lenses of all types
2.2.3 Uniformity of colour for pairs of sunglass lenses of all types
2.3 SPECIAL TRANSMITTANCE REQUIREMENTS
2.3.1 Photochromic lenses
2.3.2 Polarizing lenses
2.3.3 Gradient lenses
2.4 CLAIMED TRANSMITTANCE PROPERTIES
2.4.1 General
2.4.2 Blue-light absorption/transmittance
2.4.3 UV absorption/transmittance
2.5 OPTICAL POWER OF LENSES
2.5.1 Spherical and cylindrical power
2.5.2 Local aberrations in spherical and cylindrical power
2.5.3 Prismatic power-Individual unmounted lenses
2.5.4 Prismatic power difference-Assembled sunglasses
2.6 SCATTERED LIGHT
2.7 MATERIAL AND SURFACE QUALITY
2.8 RESISTANCE TO RADIATION
2.9 IGNITION
SECTION 3 REQUIREMENTS FOR ASSEMBLED SUNGLASSES
3.1 GENERAL CONSTRUCTION
3.2 EYE COVERAGE AND FIELD OF VIEW
3.2.1 Eye coverage
3.2.2 Field of view
3.3 DIMENSIONAL TOLERANCE
3.4 MECHANICAL REQUIREMENTS
3.4.1 Security of the lenses in the frame
3.4.2 Impact resistant sunglasses and fashion spectacles
3.5 IGNITION
3.6 MATERIALS FOR THE MANUFACTURE OF ASSEMBLED SUNGLASSES
SECTION 4 MARKING AND LABELLING
4.1 INFORMATION TO BE SUPPLIED
4.1.1 All assembled sunglasses and individual sunglass lenses
4.1.2 Category 1 lenses
4.1.3 Category 4 lenses
4.1.4 Photochromic lenses
4.1.5 Category 0 to 3 lenses
4.1.6 Driving warnings
4.2 METHODS OF MARKING AND LABELLING
4.2.1 Form of labelling
4.2.2 Durability
4.2.3 Legibility
4.3 TRANSMITTANCE CLAIMS
4.4 IMPACT RESISTANCE
APPENDIX A - USE OF SUNGLASS LENSES
A1 ADVANTAGES OF SUNGLASSES
A2 INAPPROPRIATE USE OF SUNGLASSES
A2.1 Artificial sources
A2.2 Observation of the sun
A2.3 Use of sunglasses in reduced light
A2.4 Photochromic lenses
A3 VARIABILITY OF PHOTOCHROMIC SUNGLASS LENSES
A4 BLUE-LIGHT HAZARD
A5 INFRA-RED RISK
A6 UV RISK
APPENDIX B - MEASUREMENT OF SPECTRAL TRANSMITTANCE AND CALCULATIONS OF LENS TRANSMITTANCES AND SIGNAL ATTENUATION QUOTIENTS
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 CALIBRATION OF THE SPECTROPHOTOMETER
B5 PROCEDURES
B5.1 Uniformly tinted lenses (non-polarizing)
B5.2 Uniformly tinted lenses (polarizing)
B5.3 Gradient density tinted lenses (non-polarizing)
B5.4 Gradient density tinted lenses (polarizing)
B5.5 Photochromic lenses
B6 CALCULATIONS
B6.1 Luminous transmittance
B6.2 Infrared transmittance
B6.3 Ultraviolet transmittance
B6.4 Recognition of signal lights
B7 Uniformity of luminous transmittance
APPENDIX C - SPECTRAL FUNCTIONS
C1 SCOPE
APPENDIX D - TEST FOR SPHERICAL, CYLINDRICAL AND PRISMATIC POWERS
D1 SCOPE
D2 PRINCIPLE
D3 APPARATUS
D4 PROCEDURE
D4.1 Spherical and cylindrical power
D4.2 Prismatic power-single lenses
D5 REPORTING OF RESULTS
APPENDIX E - DETERMINATION OF LOCAL ABERRATIONS IN SPHERICAL AND CYLINDRICAL POWER
E1 SCOPE
E2 PRINCIPLE
E3 APPARATUS
E4 PROCEDURE
E5 REPORTING OF RESULTS
APPENDIX F - DETERMINATION OF THE DIFFERENCE IN PRISMATIC POWER FOR PAIRS OF LENSES OR ASSEMBLED SUNGLASSES
F1 SCOPE
F2 PRINCIPLE
F3 APPARATUS
F4 PROCEDURE
F5 REPORTING OF RESULTS
APPENDIX G - LIGHT DIFFUSION TEST
G1 SCOPE
G2 PRINCIPLE
G3 TEST METHODS
G3.1 General
G3.2 Primary method
G3.3 Secondary method
APPENDIX H - ASSESSMENT OF QUALITY OF MATERIAL AND SURFACE
H1 SCOPE
H2 PRINCIPLE
H3 PROCEDURE
H3.1 General
H3.2 Method A
H3.3 Method B
H4 REPORTING OF RESULTS
APPENDIX I - TEST FOR RESISTANCE TO ULTRAVIOLET RADIATION
I1 SCOPE
I2 PRINCIPLE
I3 APPARATUS
I4 PROCEDURE
I5 INSPECTION
I6 REPORTING OF RESULTS
APPENDIX J - TEST FOR RESISTANCE TO IGNITION
J1 SCOPE
J2 PRINCIPLE
J3 APPARATUS
J3.1 Steel rod
J3.2 Heat source
J3.3 Thermocouple and temperature indicating device
J3.4 Timer
J4 PROCEDURE
J5 INSPECTION
J6 REPORTING OF RESULTS
APPENDIX K - DETERMINATION OF ROBUSTNESS AND LENS RETENTION
K1 SCOPE
K2 PRINCIPLE
K3 APPARATUS
K4 PROCEDURE
K5 REPORTING OF RESULTS
APPENDIX L - DETERMINATION OF REFERENCE POINTS
L1 SCOPE
L2 PRINCIPLE
L3 APPARATUS
L4 METHODS
L4.1 Assembled sunglasses
L4.2 Single lenses
L4.3 Uncut lenses
L4.4 Children's sunglasses
Amendments
AS/NZS 1067:2003
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.