ISO 7240-18:2009
Fire detection and alarm systems — Part 18: Input/output devices
ISO 7240-18:2009 specifies requirements, test methods and performance criteria for input/output devices connected to a transmission path of a fire detection and alarm system used to receive and/or transmit signals to or from the transmission path, necessary for the operation of the fire detection and fire alarm system and/or fire protection system.
An input/output device can be a physically separate device or its function can be integrated into another device, in which case ISO 7240-18:2009 can be used to assess this function.
An input/output device can include signal amplifiers and signal transfer in separate enclosures, in which case the requirements of ISO 7240-18:2009 shall apply.
Control and indicating equipment and ancillary control and indicating equipment (e.g. repeater panels and fire brigade panels) are not covered by ISO 7240-18:2009.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Scope
Normative references
Terms and definitions
Terms
Abbreviated terms
Requirements
Compliance
Monitoring of detachable devices
Marking and data
Marking
Data
Documentation
Requirements for software controlled devices
General
Software documentation
Software design
The storage of programs and data
Tests
General
Atmospheric conditions for tests
Operating conditions for tests
Mounting arrangements
Tolerances
Functional test
Provision for tests
Test schedule
Performance and variation in supply parameters
Object
Test procedure
Requirements
Dry heat (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Cold (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Damp heat, cyclic (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Damp heat, steady state (endurance)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Final measurements
Requirements
Sulfur dioxide (SO2) corrosion (endurance)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Final measurements
Requirements
Shock (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Impact (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Vibration, sinusoidal (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Vibration, sinusoidal (endurance)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Final measurements
Requirements
Electromagnetic compatibility (EMC) immunity tests
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Requirements
Test report
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1530.7:1998
Methods for fire tests on building materials, components and structures - Smoke control door and shutter assemblies - Ambient and medium temperature leakage test procedure
-
AS/NZS 1668.1:2015
The use of ventilation and air conditioning in buildings - Part 1: Fire and smoke control in buildings -
AS/NZS 5110:2011
Recessed luminaire barriers -
AS/NZS 5110:2011A1
Recessed luminaire barriers: Amendment 1:2013
Scope
Normative references
Terms and definitions
Terms
Abbreviated terms
Requirements
Compliance
Monitoring of detachable devices
Marking and data
Marking
Data
Documentation
Requirements for software controlled devices
General
Software documentation
Software design
The storage of programs and data
Tests
General
Atmospheric conditions for tests
Operating conditions for tests
Mounting arrangements
Tolerances
Functional test
Provision for tests
Test schedule
Performance and variation in supply parameters
Object
Test procedure
Requirements
Dry heat (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Cold (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Damp heat, cyclic (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Damp heat, steady state (endurance)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Final measurements
Requirements
Sulfur dioxide (SO2) corrosion (endurance)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Final measurements
Requirements
Shock (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Impact (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Vibration, sinusoidal (operational)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Measurements during conditioning
Final measurements
Requirements
Vibration, sinusoidal (endurance)
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Final measurements
Requirements
Electromagnetic compatibility (EMC) immunity tests
Object
Test procedure
General
Initial measurements
State of the specimen during conditioning
Conditioning
Requirements
Test report